Free calculator

    Roofing Calculator: Squares and Shingle Bundles

    Enter the roof footprint, pitch and waste. Get the roof area, the squares to order and the number of shingle bundles, then put them straight on an invoice.

    Quick answer

    One roofing square is 100 square feet of roof. Multiply the footprint by the slope factor for the pitch, divide by 100 for squares, add 10 to 15% for waste, and multiply by 3 for the number of bundles of standard asphalt shingles.

    Squares to order

    21.69

    Slope factor
    1.118
    Roof surface area
    1,972 sq ft
    Squares before waste
    19.72
    Squares with waste
    21.69
    Shingle bundles
    66

    One roofing square is 100 square feet of roof. Bundles per square vary by shingle, so confirm on the label or with your supplier before ordering.

    Opens the free invoice maker with this as the first line. Add your rate and download the PDF.

    How roof squares work

    Roofers price and order by the square, which is 100 square feet of roof surface. A 2,500 square foot roof surface is 25 squares. Most standard asphalt shingles come three bundles to the square, but heavier shingles can need more, so check the label.

    The area you measure on the ground is smaller than the surface of a pitched roof. The steeper the pitch, the more surface sits above the same footprint, and that is what the slope factor adds back.

    Slope factor by pitch

    Pitch is the inches of rise for every 12 inches of run. The slope factor is the square root of one plus the pitch ratio squared.

    • 4:12 pitch: multiply the footprint by 1.054
    • 5:12 pitch: multiply the footprint by 1.083
    • 6:12 pitch: multiply the footprint by 1.118
    • 7:12 pitch: multiply the footprint by 1.158
    • 8:12 pitch: multiply the footprint by 1.202
    • 9:12 pitch: multiply the footprint by 1.250
    • 10:12 pitch: multiply the footprint by 1.302
    • 12:12 pitch: multiply the footprint by 1.414

    A worked example

    A house with a 1,764 square foot footprint and a 6:12 roof has a surface of about 1,972 square feet, or 19.72 squares. Adding 10% waste gives 21.69 squares. At three bundles per square that is 65.07, so you order 66 bundles.

    How much waste to allow

    Waste covers cuts, starter courses, hips, valleys and the occasional damaged bundle. Many roofers allow 10 to 15%, and more on cut-up roofs with many valleys, dormers and hips. Simple gable roofs need less. Ask your supplier what they recommend for your shingle and roof shape.

    01

    How many squares are in a roof?

    Divide the roof surface area in square feet by 100. A 2,500 square foot roof surface is 25 squares. Remember the surface of a pitched roof is larger than its footprint.

    02

    How many bundles of shingles are in a square?

    Most standard asphalt shingles are three bundles to the square. Heavier or premium shingles can be four or more, so check the label on your shingle.

    03

    How do I calculate roof area from the footprint?

    Multiply the footprint by the slope factor for the pitch. A 6:12 roof has a slope factor of 1.118, so a 1,764 square foot footprint becomes about 1,972 square feet of roof.

    04

    How much waste should I add for shingles?

    Many roofers add 10 to 15%. Use the higher end for roofs with many hips, valleys and dormers. Your supplier can advise for your shingle.

    05

    What is roof pitch?

    Pitch is how steep the roof is, written as inches of rise over 12 inches of run. A 6:12 roof rises 6 inches for every 12 inches it runs.

    06

    Does this include ridge cap, underlayment and drip edge?

    No. This calculator gives roof area, squares and shingle bundles. Underlayment is usually ordered by the roll or square, and ridge cap and drip edge by the linear foot, so measure those separately.

    07

    Can I put the result on an invoice?

    Yes. Use Add to an invoice to open the free invoice maker with tear-off and shingle lines in squares. Enter your rate per square and download the PDF.

    08

    Is this an exact measurement?

    It is an estimate from a footprint and a single pitch. Complex roofs with several pitches, dormers or sections should be measured section by section, or on the roof, before you order.

    09

    How do I use a shingle calculator?

    Enter the roof footprint, choose the pitch, set your waste allowance and the bundles per square for your shingle. A shingle calculator multiplies the footprint by the slope factor, converts to squares, adds waste and rounds the bundles up.

    10

    What are roofing squares and how many do I need?

    A roofing square is 100 square feet of roof surface. The number you need is the roof's surface area divided by 100, plus waste. A roof of 1,972 square feet is 19.72 squares, or 21.69 with 10% waste.

    Ready when you are

    From squares to a signed estimate

    Send the roofing estimate by email, let the homeowner approve it online, then invoice with a payment link. Free for 14 days.

    Start free for 14 days